After 31-03-2014 SL3 BF service will not be available.

Results 1 to 6 of 6

Thread: X1-01 RM713 problem after flash

  1. #1
    Registered User
    Join Date
    Jan 2008
    Location
    Europe
    Posts
    99
    Rep Power
    7

    Default X1-01 RM713 problem after flash

    Hi phone was in working condition and unlocked

    here some info

    MCU Version V 05.36
    MCU Date 15-07-11
    Product RM-713 (Nokia RM-713)
    Manufacturer (c) Nokia
    IMEI 359033045xxxxxx
    IMEI Spare 3A95300354xxxxxx
    IMEI SV 3395300354xxxxxxF2000000
    PPM V 05.36, 15-07-11, RM-713, (c) Nokia, AE
    PSN C8E8F84AI
    Product Code 059J7D7
    Module Code 0204758
    Basic Product Code 059K917
    PSD 0000000D00000000
    HW 3051
    UEM 1328
    UPP 2292
    LCD TPO:BARACOAv82, HX5081
    ADSP Sw p'V 05.36\n15-07-11\nRM-713\n(c) NMP\nae
    Asic 11
    HW Signature E08FFBDBCA8DDAAD
    Simlock Server
    Simlock Key 0010100000000000
    Simlock Profile 0000000000030002
    Simlock Aux 000B0000
    Simlock IMEI 0000359033045xxxxxxx
    Simlock Key Cnt 0
    Simlock FBUS Cnt


    i flashed phone for lang change to highest version 5.44

    first phone was flashed Ok, but after flash languages not changed and prog show still ver 5.36 and factory reset failed
    i flashed again (sometimes with error but finally ok) and now:

    <code>
    Phone is in: Local mode
    Model: RM-713 ( X1-01)
    V 05.44/21-09-11/RM-713 (c) Nokia
    Production serial number C8E8F84AI
    Product code 059J7D7
    Module code
    Basic production code 059K917
    Flash code
    Order number
    Long production SN
    MCU SW V 05.44/21-09-11/RM-713/(c) Nokia
    HW
    PCI
    UEM 1328
    UPP 8850
    LCD TPO:BARACOAv82/HX5081
    PPM V 05.36/15-07-11/RM-713/(c) Nokia/AE
    ADSP SW p'V 05.36\n15-07-11\nRM-713\n(c) NMP\nae
    IMEI: ????????0000000
    V 05.44/21-09-11/RM-713 (c) Nokia
    IMEI: ????????0000000
    Failed to Read
    V 05.44/21-09-11/RM-713 (c) Nokia
    IMEI: ????????0000000
    Failed to Read
    VPP is DISABLED.
    Processing File: rm713_005.440
    Boot...
    Erase[0.00 MB]...
    in 0.01s
    Flash[0.00 MB]...ROM ACK A2-00-34
    L1 SEC=0xAB
    FLS_SendRomLoader()=127
    Executing loader...
    LDR SEC MODE: CC //Default_RAM_Bootloader
    020086000200010089000300
    FLS_SendSecondLoader()=0
    DELTA CERT OK
    Number of devices: 1
    Device ID: 0020-8804 (23280001) (16MB)
    Settings: 0/64
    Size: 0x1000000
    Regions: 2
    0: 007F x 00020000 = 0x00FE0000
    1: 0004 x 00008000 = 0x00020000
    CFI - OK
    FLS_InitFlash()=0
    Sending SecPac...
    SecPac OK
    Erase area: addr: 0x00000000 size: 0x6000
    flashing =0x601c...
    Erase area: addr: 0x00800000 size: 0x3f0000
    flashing =0x3f001c...
    Erase area: addr: 0x00C5D000 size: 0x19e700
    flashing =0x19e71c...
    Finalize
    Error Finalize!!
    in 155.27s
    * * Processed file in 155.29 seconds
    Processing File: rm7130_nai05.44ei
    Boot...
    Erase[0.00 MB]...
    in 0.00s
    Flash[0.00 MB]...FLS_InitFlash()=102

    %%%%%%%% ERROR SENDING FLASH:
    Failed at address 00000000
    VPP is DISABLED.
    Processing File: rm713_005.440
    Boot...
    Erase[0.00 MB]...
    in 0.01s
    Flash[0.00 MB]...ROM ACK A2-00-34
    L1 SEC=0xAB
    FLS_SendRomLoader()=127
    Executing loader...
    LDR SEC MODE: CC //Default_RAM_Bootloader
    020086000200010089000300
    FLS_SendSecondLoader()=0
    DELTA CERT OK
    Number of devices: 1
    Device ID: 0020-8804 (23280001) (16MB)
    Settings: 0/64
    Size: 0x1000000
    Regions: 2
    0: 007F x 00020000 = 0x00FE0000
    1: 0004 x 00008000 = 0x00020000
    CFI - OK
    FLS_InitFlash()=0
    Sending SecPac...
    SecPac OK
    Erase area: addr: 0x00000000 size: 0x6000
    flashing =0x601c...
    Erase area: addr: 0x00800000 size: 0x3f0000
    flashing =0x3f001c...
    Erase area: addr: 0x00C5D000 size: 0x19e700
    flashing =0x19e71c...
    Finalize
    Finalize flash - OK
    0200050204000100CD0AE3000300
    in 154.57s
    * * Processed file in 154.59 seconds
    Processing File: rm7130_nai05.44ei
    Boot...
    Erase[0.00 MB]...
    in 0.01s
    Flash[0.00 MB]...Number of devices: 1
    Device ID: 0020-8804 (23280001) (16MB)
    Settings: 0/64
    Size: 0x1000000
    Regions: 2
    0: 007F x 00020000 = 0x00FE0000
    1: 0004 x 00008000 = 0x00020000
    CFI - OK
    FLS_InitFlash()=0
    Sending SecPac...
    SecPac OK
    Erase area: addr: 0x00E60000 size: 0xb5c00
    flashing =0xb5c1c...
    Finalize
    Finalize flash - OK
    0200050204000100820896000300
    in 20.21s
    * * Processed file in 20.23 seconds
    No need to extract content.
    Processing File: rm713_005.44ei
    Boot...
    Erase[0.00 MB]...
    in 0.01s
    Flash[0.00 MB]...Number of devices: 1
    Device ID: 0020-8804 (23280001) (16MB)
    Settings: 0/64
    Size: 0x1000000
    Regions: 2
    0: 007F x 00020000 = 0x00FE0000
    1: 0004 x 00008000 = 0x00020000
    CFI - OK
    FLS_InitFlash()=0
    Sending SecPac...
    SecPac OK
    Erase area: addr: 0x00100000 size: 0x54b100
    flashing =0x54b11c...
    Finalize
    Finalize flash - OK
    02000502040001006C32AA000300
    POWER-OFF
    in 138.38s
    * * Processed file in 138.41 seconds
    * * * Phone flashing done in 5:13 minutes
    Post Flash serial tunning of phone....
    Pooling mode for full factory set...
    V 05.44/21-09-11/RM-713 (c) Nokia
    IMEI: ????????0000000
    Factory Default Settings...OK
    Dynamic camera configuration...
    Pooling mode for profile update...
    RM-713\RM713_059D830_05.44_001.dcpf\059D830\ProductPr ofile_v1.0.xml
    Sending Profile to Phone...OK
    Updating product code: 059D830
    Reset user code...User Code was:
    Successfull, code is 12345
    V 05.44/21-09-11/RM-713 (c) Nokia
    IMEI: ????????0000000
    Failed to Read
    V 05.44/21-09-11/RM-713 (c) Nokia
    IMEI: ????????0000000
    Failed to Read


    <code\>


    1.what wrong with flash process?
    2.does latest sw support X1-01 correctly
    3.shoujd i use tx2 or not?
    4. how reviwe imei back

    i have only PM backup

    please help me

    Thanx

  2. #2
    Registered User
    Join Date
    Jan 2008
    Location
    Europe
    Posts
    99
    Rep Power
    7

    Default Re: X1-01 RM713 problem after flash

    miracle...

    i write back PM and now:

    Phone is in: Local mode
    Model: RM-713 ( X1-01)
    V 05.44/21-09-11/RM-713 (c) Nokia
    Production serial number C8E8F84AI
    Product code 059J7D7
    Module code 0204758
    Basic production code 059K917
    Flash code
    Order number
    Long production SN
    MCU SW V 05.44/21-09-11/RM-713/(c) Nokia
    HW 3051
    PCI
    UEM 1328
    UPP 8850
    LCD TPO:BARACOAv82/HX5081
    PPM V 05.44/21-09-11/RM-713/(c) Nokia/EI
    ADSP SW p'V 05.44\n21-09-11\nRM-713\n(c) NMP\nei
    IMEI: 359033045xxxxxx
    WARNING: VPP pin is not connected, disabling VPP.
    V 05.44/21-09-11/RM-713 (c) Nokia
    IMEI: 359033045xxxxxx
    Failed to Read

    but still simlock corrupted
    and i cant write 18 field of PM
    maybe in this field is simlock data?
    it have data:
    0=D007000000000F00000000000000...and many zero's

  3. #3
    Product Supporter mm-gsm's Avatar
    Join Date
    Jan 2008
    Location
    Poland/Sweden
    Posts
    6,569
    Rep Power
    19

    Default Re: X1-01 RM713 problem after flash

    Restore PM backup only

  4. #4
    Registered User
    Join Date
    Jan 2008
    Location
    Europe
    Posts
    99
    Rep Power
    7

    Default Re: X1-01 RM713 problem after flash

    what do you mean
    where i can find this backup
    i cant see any backups

  5. #5
    Product Supporter Amir-SkillZ's Avatar
    Join Date
    Dec 2007
    Location
    Chisti Sabri Kalyami.. BBPIN = 29700A53
    Age
    29
    Posts
    5,804
    Rep Power
    35

    Default Re: X1-01 RM713 problem after flash

    Did u made any at the first hand ...Any PM Back of ur Phone
    Always EDIT IMEI and PUBLIC HASH KEY from POSTED LOG

  6. #6
    Registered User
    Join Date
    Jan 2008
    Location
    Europe
    Posts
    99
    Rep Power
    7

    Default Re: X1-01 RM713 problem after flash

    i made full pm backup from working phone before flashing
    what else?
    prog didnt make any backups

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. X-3-02 flash problem
    By hitibiti in forum MT box Nokia
    Replies: 1
    Last Post: 13-07-11, 13:28
  2. 6303 flash problem
    By blueteamgsm in forum Polski
    Replies: 11
    Last Post: 03-02-10, 20:39
  3. N 86 flash problem
    By telci in forum MT box Nokia
    Replies: 4
    Last Post: 07-12-09, 20:56
  4. e65 flash problem - error sending flash
    By jonnybell in forum MT box Nokia
    Replies: 14
    Last Post: 30-06-09, 00:41
  5. flash n 81 problem
    By gurbuz in forum MT box Nokia
    Replies: 8
    Last Post: 13-03-08, 12:50

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •